Do You Have A Hot Water Leak? Call A Professional
Have you seen a large pool of water close to the water heater? You might be thinking whether your hot water heater may be going through leaks or if the stagnant water could be due to an appliance or pipe that is nearby.
Follow these easy steps to determine the possibility that the hot water heater may be leaky!
Fittings
Connectors or fittings between the cold water inlet pipe and the hot water outlets pipes found on the uppermost part of the water heater could be a common source of leakage. Check for this cand call in a professional for Sydney hot water repairs.
Examine the places in which the outlet and inlet pipes join to connect with the hot water heater to look for evidence of leakage. Typically, leaks in these fittings are easily repaired by tightening up the connections using the help of a wrench. But, if the leak continues to grow and there’s a puddle of water over the hot water heater, this could suggest external damage.
Pressure Relief Valve and Temperature
The pressure relief and temperature valve, which is located on the side or the top of the tank, is another place that water could leak out of.
As water heats up in the hot water heater the volume of it expands and causes pressure, an event called thermal expansion. The pressure and temperature relief valve is a safety device created to alleviate pressure in the event that the pressure within your hot tank is excessively high. If the valve gets activated it opens and lets out water from the tank, decreasing the pressure.
If the valve is responsible for the flow of the water, it’s either a sign that the valve is working as it should or is defective. Lower the temperature of your tank by using the thermostat, and then observe. If the valve is still leaking then it’s most likely damaged and should consider Sydney Hot water repairs.
Tank
The hot water heater in your home has an internal tank that stores hot water, and is made from steel, and encased with insulation. If you notice a significant leak that is coming through the base of your hot water heater it is probably damaged.
As usual as this is the case, there isn’t a method to fix a broken tank. The only alternative is to buy a brand replacement hot water heater.
Drain Valve
Drain valves are situated on lower levels of the tank of your hot water heater which is designed to drain the tank of water. It is a typical maintenance procedure for people living in areas that have hard water, where sediment accumulates and decreases the heating system’s effectiveness.
If you notice water at the bottom of the heating tank for hot water, you need to ensure that the drain valve is shut off. If there is water leaking out of it, then the drain valve might be loose. If water is flowing even after tightening up the fitting that connects with the drain valve tank, it is probably defective and needs to be replaced. Call a Sydney hot water repairs professional to fix this issue.
Don’t confuse Leaks and Condensation
The last tip is to not get too excited about every drop of water you observe.
Condensation is typical around hot water heaters as a result of humidity and changes in temperatures of water. Tiny water droplets could be seen on floors, in pipes or the inside of the body of the water heater however that doesn’t suggest that there’s a leak.
Conclusion
If you see pools of water over the top or around the base or near the water heater, it’s worth doing an examination on your heater prior to it’s too late.Water, rust or malfunctioning controllers are all indications of a hot water heater might be leaking. Call in a professional plumber to get this issue resolved as soon as possible.